Clik here to view.
Re: VMWare workstation free version
Thanks for the response. I downloaded the VMWare image from vendor and can see the below list of fiels. Which file do i need to start with ? Also how to open the file in Workstation
View ArticleRe: VMWare workstation free version
It's the configuration (.vmx) file which you will have to open. André
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
Thank You a.p. for your response but the issue is deep. If you look at the SSs I have attached, the problem is weird cause although Client sees the formatting as GPT and the partition as VMFS. I have...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
Just a guess.The installed ESXi build is a 3 years old one. What I could think of is that maybe the datastore has been formatted using a newer build, which now causes the LVM mismatch.As mentioned it's...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
It returns nothing. I shall try updating the host but I have been told this was always 6.0. But I shall update and try.
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
Please run the following command, and post the output.hexdump -C /dev/disks/mpx.vmhba1\:C0\:T0\:L0:3 -n 16636 -s 0x100200 | grep -C 2 '[a-zA-Z0-9]\{4\}-[a-zA-Z0-9]'Note: You'll have to replace the...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
Idk if this was expected but it returned nothing as well.
View ArticleTeradici 1 firmwares? Where can I find them
Hi I am having an issue I would need to know if anyone can possibly provide me with valid links to Teradici 1 firmwares?I am currently on 3.5.0 and I need to go to the latest firmware
View ArticleRe: Nsx VTEP uplink configure
Please review page 112 of https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/products/nsx/vmw-nsx-network-virtualization-design-gui… as this goes into this topic in more detail.
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
I actually expected an output which includes the datastore's UUID, which shows up for mounted filesystems using:esxcli storage filesystem listThere should be at least something in the vmkernel.log...
View ArticleClik here to view.
Розовый экран при добавлении контроллера 9341-8i
Добрый день.При добавлении raid контроллера lsi 9341-8i, esxi 6.0 падает в розовый экран.Драйвера и прошивку контроллера ставил из списка с сайта vmware. Как исправить данную проблему? Message was...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
I ran the command and although not 100% sure am thinking all of these are UUIDs of ds1 which is the disk that host is installed. And I seriously appreciate all of your help here.
View ArticleRe: High Sierra and Fusion "stuck" keys
As this thread was for High Sierra and shows as resolved using the once off VMWare patch I created a new threadfor Mojave to record the issue. Although after so long its obvious that VMware can not fix...
View ArticleRe: WKS 15.0.2 GSOD on W10 insder pro build 1809-18290-1000 (the latest)
The UWP Task Manager is not very reliable when it comes to killing Win32 applications I have found. It is not only VMware Workstation that it can't kill. You could try Process Explorer from...
View ArticleRe: Network Settings greyed out - everything else ok
Make sure your Mac OS Gatekeeper setting is allowing VMware Fusion under System Perferences->Security & Privacy - towards the bottom under 'Allow apps downloaded from:' choose 'allow' for the...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
In the output "ds1" shows up as "VMFS-unknown version", which most likely means that the datastore has been created using a newer ESXi/VMFS version than what ESXi 6.0 supports. This bringa us back to...
View ArticleRe: I have a question on device/credential guard not being compatible on...
There are discussions already on this forum already about this with possibl solutions. A search of the forum should uncover them.
View ArticleRe: Ubuntu System Clock timzeone
Installing or updating VMware Tools might fix the issue. However, check out the following Stackoverflow thread to see id it relates to your situation:synchronization - VMware time sync problem -...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
I have just updated the system to 6.5.0 and the disk that I want to mount still showing no signs of wanting to be mounted. Idk why ds1 is showing unknown version as from the client it shows it is VMFS...
View ArticleRe: Can't see datastore after reinstall of the Host 6.0
Version 5.81 has been introduced with ESXi 6.5, so this should actually work. However, updating to v6.5 U1 is worth a try.If this still doesn't help, and voma still shows an LVM mismatch, then try to...
View Article